Siemens SIMATIC RF600 System Manual page 45

Antenna configuration 6:
Antenna configuration 7:
SIMATIC RF600
System Manual, 10/2009, J31069-D0171-U001-A8-7618
RF600 system planning
4.3 Antenna configurations
Description/ application areas
Preferred application: For the
identification of goods at loading portals.
Similar to configuration 4, but the
reliability of tag identification is improved
as a result of the four antennas at
separate locations, so the tag position is
not critical.
① Tag
This antenna configuration is possible
with the following readers:
RF660R with four antennas
•
Description/ application areas
This tunnel configuration is suitable for
conveyor belt applications. The goods
with the tags to be read are moving
forwards on a conveyor belt but the
alignment of the tags relative to the
antennas is not clearly defined. One of
the antenna is located on the floor and
radiates vertically upwards in the
direction of the conveyor belt. A relatively
high reading reliability is achieved due to
the use of four antennas.
① Tag
This antenna configuration is possible
with the following readers:
● RF660R with four antennas
45