Constraints - Siemens SIMATIC RF600 System Manual

Integration into networks
8.1 Integration in IT networks
8.1.3.11

Constraints

Operating modes
The following constraints apply with regard to operating modes:
Note
Constraints
The release of operation in MultiTag mode for the RF620R/RF630R will follow at a later time.
More information can be found on the Service&Support pages
(www.siemens.com/automation/service&support) on the Internet.
The "Repeat command" and "Command chaining" options are also not supported.
Further restrictions
In the Engineering System and in the configuration display in Runtime, the following special
characters may not be used:
290
System Manual, 10/2009, J31069-D0171-U001-A8-7618
SIMATIC RF600