Siemens SIMATIC RF600 System Manual page 44

RF600 system planning
4.3 Antenna configurations
Antenna configuration 4:
Antenna configuration 5:
44
Description/ application areas
Preferred application: For the
identification of goods at loading portals.
Similar to configuration 2, but with
additional reading reliability when the tag
is at an angle to the vertical.
① Tag
This antenna configuration is possible
with the following readers:
RF660R with three antennas
•
Description/ application areas
Preferred application: For the
identification of goods at loading portals.
The tag is located in the field of radiation
of all four antennas, so the tag position
can vary more than in configuration 2 for
reliable tag identification.
① Tag
This antenna configuration is possible
with the following readers:
RF660R with four antennas
•
System Manual, 10/2009, J31069-D0171-U001-A8-7618
SIMATIC RF600