Pin Assignment Connector Ex-42054-9-8S Interface Converter Card - Siemens SIMATIC RF600 System Manual

8.1.3.6

Pin assignment connector EX-42054-9-8S interface converter card

The interface converter card EX-42054-9-8S is installed in the PC. A driver is installed for
each interface so that 8 additional COM ports become available. A connector matching the 8
interfaces must be mounted on the reader cable.
The following figure gives an example of a pin assignment for a connector on an RS422
reader cable (Order No. 6GT2891-0EH50) as well as the power supply for the reader:
Figure 8-4
Note
Same pin assignment for the interface converter card EX-42052-9-2S
For the interface converter card EX-42052-9-2S a connector with the same assignment as
shown above must be installed.
SIMATIC RF600
System Manual, 10/2009, J31069-D0171-U001-A8-7618
Connector pin assignment EX-42054-9-8S and reader power supply
Integration into networks
8.1 Integration in IT networks
285