Transponder/tags
7.4 SIMATIC RF630T
7.4.2
Ordering data
Ordering data
SIMATIC RF630T (Europe)
•
•
SIMATIC RF630T (USA / Canada)
•
•
7.4.3
Planning application
7.4.3.1
Optimum antenna/transponder positioning with plane mounting of the transponder on
metal
The maximum reading range is achieved when the reader antenna is positioned at right
angles to the mounting surface. In the case of parallel mounting directly above the
transponder, detection is not possible.
Positioning of two RF660A antennas (RF660R reader)
Figure 7-18
Example of optimum antenna/transponder positioning
Depending on the design of the metal bracket (surface parallel to the transmitting antenna),
an angle of 10 degrees will have a favorable effect.
212
For attaching to metal surfaces
Frequency 865 MHz to 868 MHz
For attaching to metal surfaces
Frequency 902 MHz to 928 MHz
Order no.
6GT2810-2EC00
6GT2810-2EC10
System Manual, 10/2009, J31069-D0171-U001-A8-7618
SIMATIC RF600