Mounting/Installing Fcc - Siemens SIMATIC RF600 System Manual

Readers
5.2 RF620R reader
5.2.3.1

Mounting/Installing FCC

Emitted radiation
The transmitter complies with the requirements of Health Canada and the FCC limit values
for subjecting persons to HF radiation, provided that a minimum spacing of 26 cm exists
between antenna and person. When the antennas are installed, you must therefore ensure
that a minimum spacing of 26 cm is maintained between personnel and antennas.
Mounting/installing the device
You can mount the reader in two different ways:
● Via a standardized VESA 100 mounting system using the Antenna Mounting Kit (see
● Directly onto a flat surface.
The positions of the fixing holes for the device are shown in the section Dimension drawings
(Page 118).
112
CAUTION
Chapter Mounting with antenna mounting kit (Page 144)). Tighten the M4 screws on the
rear of the reader using a maximum torque of ≤ 1.3 Nm.
System Manual, 10/2009, J31069-D0171-U001-A8-7618
SIMATIC RF600