Using Option Exm With The Keysight 11970 Series Mixers - Keysight X Series Measurement Manual

Option EXM External Mixing

Using Option EXM with the Keysight 11970 Series Mixers.

Using Option EXM with the Keysight 11970 Series Mixers.
The following examples explain how to, connect the external mixers to the signal
analyzer using a diplexer, choose the band of interest, activate conversion loss
correction data, and how to use the signal-identification functions.
Step
1 Set up the equipment
2 Set the analyzer to the
Spectrum Analyzer mode
3 Preset the analyzer
4 Select external mixing.
5 To select Q, U, V or W
bands
6 View the spectrum display
Action
• Connect the signal source, diplexer,
and harmonic mixer to the signal
analyzer as shown:
• Press Mode, Spectrum Analyzer
• Press Mode Preset.
• Press Input/Output, External
Mixer, External Mixer, External
Mixer Setup
a. Press Mixer Presets, Keysight
11970.
b. Select the appropriate key
corresponding to 11970 frequency
band.
• Press Return twice.
160
Notes
The default is 11970A