Presetting The Signal Analyzer - Keysight X Series Measurement Manual

Example:
Choice Allows you to make a selection from a list of values.
Example:
Ad just Highlights the softkey and sets the active function.
Examples:

Presetting the signal analyzer

The preset function provides a known starting point for making measurements. The
analyzer has two main types of preset:
User Preset
Mode Preset
For details, see the help or User's and Programmer's Reference.
Creating a user preset
If you constantly use settings which are not the normal defaults, use the following
steps to create a user-defined preset:
Step
1 Set analyzer parameters as
2 Set the current parameters
3 To select a preset state
Getting Started with the Spectrum Analyzer Measurement Application
A submenu key allows you to view a new menu of softkeys
related to the submenu key category.
A choice key displays the currently selected submenu choice,
in this example, dBm. When the choice is made, the submenu
automatically returns.
Press this type of key and enter a value.
The default for softkeys with an automatic (
(
selection changes to manual. You can also press the softkey
twice to change to manual.
Restores the analyzer to a user-defined state.
This type of preset restores the currently selected mode to a
default state.
desired
as the user preset state
) choice is automatic. After you enter a value, the
Man
Action
• Press User Preset, Save User Preset
• Press User Preset, User Preset
13
Making a Basic Measurement
) or manual
Auto