Table of Contents
Advertisement
GangWay Operation
When GangWay Operation is enabled in the menu, the SloMoPro is able to remotely
control the GangWay4, GangWay16 or GangWay32.
Setup
To use the GangWay4, GangWay16 or GangWay32 with the SloMoPro:
1. Connect port 1 of the SloMoPro to the rear panel controller port of the
GangWay4, GangWay16 or GangWay32 as shown below.
2. Enable GangWay Operation in the SloMoPro menu as shown below.
•
To go to the menu, press the MENU
button. Select the menu item by
turning the Jog Wheel.
•
As the Jog Wheel is turned, different
menu items are displayed on the top
line of the window.
Scroll to the menu item for
GangWay Oper.
•
When the menu item GangWay
Oper. is selected, press the ENTER
button to move the cursor to the bottom line.
Turn the Jog Wheel so that the value
•
is set to Enabled.
•
Press MENU to exit the menu.
SloMoPro RS422 User Manual
37
> Time Code Type
30 drop
> GangWay Oper.
Disabled
> GangWay Oper.
Enabled
Advertisement
Table of Contents
