Table of Contents
Advertisement
Shuttle Select
Pressing this button causes the SloMoPro to disable the Jog Wheel and
Shuttle Ring. This prevents the SloMoPro from sending unintended Jog or
Shuttle messages when the SloMoPro is accidentally bumped. The LEDs
above the Shuttle Ring will extinguish when the Jog Wheel and Shuttle Ring
are disabled.
Track Arming Functions
Asm
Pressing this button causes the SloMoPro to command the video device to
enable the Assemble Record mode. Not all video devices support this. This
is intended for tape based video devices. Pressing this button will disable
Insert Mode and disarm all video, audio and timecode tracks. Refer to the
Record Modes section for more detail.
This illuminates when the video device reports back that Assemble mode is
enabled.
Ins
Pressing this button causes the SloMoPro to command the video device to
enable the Insert Record mode. Not all video devices support this. This is
intended for tape based video devices. Pressing this button will disable
Assemble Mode. Refer to the Record Modes section for more detail.
This illuminates when the video device reports back that Insert mode is
enabled.
V/TC
Pressing this button causes the SloMoPro to command the video device to
arm the video track for Insert Recording. Not all video devices support this.
This is intended for tape based video devices.
Holding the Shift button while pressing this button causes the SloMoPro to
command the video device to arm the timecode track for Insert Recording.
Not all video devices support this. This is intended for tape based video
devices.
Refer to the Record Modes section for more detail.
This illuminates when the video device reports back that Insert mode is
enabled and the video track is armed.
A1/A3,
A2/A4
Pressing these buttons causes the SloMoPro to command the video device
to arm the audio tracks for Insert Recording. Not all video devices support
this. This is intended for tape based video devices. Because there are a
variety of video devices of the market with various track counts and types
(analog/Hi-Fi/digital) you will need to configure the Audio Track Type
appropriately. Refer to the Record Modes section for more detail.
This illuminates when the video device reports back that Insert mode is
enabled and the audio track(s) is/are armed.
SloMoPro RS422 User Manual
13
Advertisement
Table of Contents
