Clip Transfer Protocol
The SloMoPro can transfer cue information in one of two protocols:
•
Ash Vale SM-2a
•
SloMoPro
The SM-2a protocol is:
The port settings are: 38400 bits/sec, no parity, 8 data bits, 1 stop bit.
The data format is
The SloMoPro protocol is:
The port settings are: 38400 bits/sec, no parity, 8 data bits, 1 stop bit.
The data format is
0Dh 0Dh 0Ah <Cue#000> 20h <StartTime> 20h <EndTime> 20h <n1> <n0>
0Dh 0Dh 0Ah <Cue#001> 20h <StartTime> 20h <EndTime> 20h <n1> <n0>
0Dh 0Dh 0Ah <Cue#399> 20h <StartTime> 20h <EndTime> 20h <n1> <n0>
SloMoPro RS422 User Manual
0Dh 0Ah <Cue#000> 20h <Time>
0Dh 0Ah <Cue#001> 20h <Time>
:
0Dh 0Ah <Cue#999> 20h <Time>
0Dh 0Ah @
:
0Dh 0Dh 0Ah @
42