Videodevices Pix Series - JLCooper Electronics SloMoPro User Manual

VideoDevices PIX Series

This includes the PIX-270i, PIX-260i and PIX-250i.
For the PIX recorders to respond to the SloMoPro, RS-422 Remote Control on the
PIX recorders must be enabled.
1. On the front panel of the PIX recorder, press the MENU button.
2. Use the encoder knob to scroll to configuration item
7 Remote Control.
Press the encoder knob.
3. Use the encoder knob to scroll to configuration item
1 RS422.
Press the encoder knob
4. Use the encoder knob to scroll to select value
On.
Press the encoder knob.
5. Press the MENU button to exit.
For the PIX recorders to correctly locate to the proper location, all the timecode
recorded on the the PIX recorders must be unique. Fortunately, this can be done by
the PIX recorders.
1. On the front panel of the PIX recorder, press the MENU button.
2. Use the encoder knob to scroll to configuration item
4 Timecode/Sync.
Press the encoder knob.
3. Use the encoder knob to scroll to configuration item
3 Timecode Mode.
Press the encoder knob
4. Use the encoder knob to scroll to select value
Freerun,
Freerun Auto Mute,
Record Run,
24h Run or,
24h Run Auto Mute.
Press the encoder knob.
5. Press the MENU button to exit.
SloMoPro RS422 User Manual
34