11. Audio Trk Type
This determines how the audio track arming is handled.
•
Type 1
Older video devices with two analog tracks.
A1 = Analog Audio 1 (This is sometimes interpreted as Digital Audio 1 in
some video devices)
A2 = Analog Audio 2 (This is sometimes interpreted as Digital Audio 2 in
some video devices)
Shift + A1 = Analog Audio 3 (TC in some video devices)
Shift + A2 = Analog Audio 4 (Sync in some video devices)
•
Type 2
Sends a 2 byte track arm message with the A1 & A2 bits copied from the
D1 & D2 bits. Tally back uses byte 5 of the Status Data message.
A1 = Analog Audio 1 and Digital Audio 1
A2 = Analog Audio 2 and Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
•
Type 3
Same as Type 2, except Tally back uses the Edit Preset Sense message.
A1 = Analog Audio 1 and Digital Audio 1
A2 = Analog Audio 2 and Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
•
Type 4
Same as Type 2, except the A1 & A2 bits are set to zero.
A1 = Digital Audio 1
A2 = Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
12. Stop Method
Sets Stop behavior.
•
STOP Command
A Stop command is sent.
•
STILL Command
A Shuttle=0 (Still) command is sent.
•
STILL, STOP
The first push will cause a Still command to be sent. The second push
will cause a Stop to be sent.
13. FFwd and Rew
Sets Fast Forward and Rewind behavior.
•
Latched
After release of the key, the controlled SloMoPro will remain in selected
operation until some other button is pressed.
SloMoPro RS422 User Manual
19