Record Modes; Crash Recording; Assemble Recording; Insert Recording - JLCooper Electronics SloMoPro User Manual

Record Modes

The SloMoPro includes buttons dedicated to adjusting the Edit Preset status of a
target machine. The main modes are:

Crash Recording

Insure that neither the INS nor ASM LEDs are on. Holding down the Shift
button, then pushing the PLAY button will place the machine(s) in the Crash
Record mode.

Assemble Recording

Toggle the ASM button so that it is on. Holding down the Rec/Shift button,
then pushing the PLAY button will place the machine(s) in the Assemble
Record (Edit) mode.

Insert Recording

Toggle the Ins button so that it is on. In addition, press the desired tracks so
that they are on. Immediately available are the Video, A1 and A2 tracks.
When the Rec/Shift is pushed, the A1 and A2 buttons/LEDs become the D3
and D4 toggles. Holding down the Rec/Shift button, then pushing the PLAY
button will place the machine(s) into the Insert Record (Edit) mode. If no
Video or Audio track is enabled, only the Play command will be sent.
To exit any of the modes while the video device in motion, simply press the Stop
button.
The exact command sent will depend on the
SloMoPro RS422 User Manual
35
Audio Trk Type menu item.