Table of Contents
Advertisement
26. Rcv Cue Dump
Pressing the ENTER key causes the SloMoPro to prepare itself for reception of a
Cue Dump from another SloMoPro or from a computer. Reception is via port #4.
The SloMoPro will automatically detect which format is being sent to it.
Pressing the CLR/ESC button aborts this operation.
When sending data from a computer, a 25 mS delay must be inserted between
each cue to allow the SloMoPro to write to nonvolatile memory. The SloMoPro
performs this when it sends data.
27. Erase All Cues
In Cue and Park mode, pressing the ENTER key will set all 1000 cue locations to
00:00:00:00, which is considered an erased location.
In Cue/Ply/Stop mode, pressing the ENTER key will set all 400 start and stop
times to 00:00:00:00, which is considered an erased location.
In CuePlyStopSlo mode, pressing the ENTER key will set all 400 start and stop
times to 00:00:00:00 and set the speed to 00 00, which is considered an erased
location.
SloMoPro RS422 User Manual
23
Advertisement
Table of Contents
