Table of Contents
Advertisement
Editing the Cue List
It is possible to step thru the list of Cues and Enable or Disable them individually for
inclusion in the "Play all Clips" playback.
1. Set the W1 or W2 button for Toggle Clip Enable.
2. As you step thru the clips using the Next, Last, or numerical input, the
selected W1 or W2 button's LED will light if a clip is enabled. Pressing the
button toggles the condition.
It is possible to change the SloMo speed that a CuePlyStp Slo Clip plays back.
This will take effect on individual recalls of a Clip or on the Play all Clips"
operation.
3. Program the W1 or W2 button for "Change SloMo" operations.
4. With the T-Bar Enabled, recall a Clip.
5. Move the T-Bar to a desired speed (optional at this point).
6. Recall a clip. While playing, you may move the T-Bar to desired speed.
7. When set to desired speed, press the W1 or W2 button programmed in step
3 above. The new speed will now be written to the current clip.
SloMoPro RS422 User Manual
30
Advertisement
Table of Contents
