•
Momentary
Upon release, either a Stop or Still will be sent, depending on the Stop
Method selected above.
14. Trk Data Tally
Allows disabling of this tally, which, under unusual circumstances, might disrupt
normal track select operations. If this is disabled, the SloMoPro will not "know"
of any track operation done on the controlled SloMoPro itself.
•
Disabled
•
Enabled
15. W1 Button Send
W2 Button Send
Sets the command sent when the W1 and W2 buttons are pressed.
•
Off (no command sent)
•
Preroll Cmd
•
Full EE On
•
Preview Cmd
•
Full EE Off
•
Review Cmd
•
Select EE On
•
Toggle Clip Enable (see "Editing the Cue List" below)
•
Change SloMo (see "Editing the Cue List" below)
16. Show Shut Speed
Displays the Shuttle speed when the Shuttle Ring is turned.
•
Disabled
•
Enabled
17. Log Operation
Enables or disables Log Operation. (See Log Operation in appendix)
•
Disabled
•
Enabled
18. Cue Operation
This determines how cues are stored and played back and the definition of a
cue.
•
Cue and Park
Cues are only defined a start time. When a cue is recalled, a CueUp
message is sent to SloMoPro and no further action is taken. Cue start
times are captured using the Store Cue button. This mode allows 1000
cues.
•
Cue/Ply/Stop
Cues are stored as start and stop times. When a cue is recalled, a
SloMoPro RS422 User Manual
20
•
Autoedit Cmd
•
½x Play
•
Sync Play Cmd
•
½x Rev Play
•
Clip Minus
•
Clip Plus
•
Loop Mode