Table of Contents
Advertisement
Configuration Menu
There are a number of user configurable items that should be checked and set for
your application.
To go to the menu, press the MENU button. Select the menu item by turning the
Jog Wheel.
As the Jog Wheel is turned, different menu items are displayed on the top line of the
window.
There are two types of items accessed this way: Parameters and Commands.
Parameters allow the user to modify settings and are stored in nonvolatile memory.
Commands allow you to perform certain operations such as a memory dump or
clear memory. In the case of parameters, you will see the currently selected and
stored value on the bottom line. An arrow of the left side of the display points to the
top line, indicating that the menu item is now being selected by the wheel.
Once the desired menu item is shown, a press of the ENTER key will cause the
arrow to change to the bottom line of the display.
This indicates that turning the Jog Wheel will scroll the possible options for that
menu item. Pressing the ENTER key again will return the arrow to the top line, and
additional menu items may be scrolled thru. When all options have been set,
another push of the MENU button will save them to the nonvolatile memory. If you
decide to not save, pressing the CLR/ESC key will exit out of the menu mode
without saving.
When commands are reached at the end of the parameters, the arrow symbol no
longer appears. The second line will now be an instruction, such as the following:
In some cases, additional instructions may appear after the pressing of ENTER.
Pressing the CLR/ESC key will exit out of the menu operation.
On the following pages are the list of parameters and commands along with all the
possible options. The defaults after initialization are shown in boldface.
SloMoPro RS422 User Manual
> Time Code Type
30 Drop
Time Code Type
> 30 Drop
ENTER = Erase
16
Advertisement
Table of Contents
