Table of Contents
Advertisement
Parameters
1. Time Code Type
This is only used by the Step Frame (Frame+1 and Frame-1) functions. This
determines how the SloMoPro behaves at whole second boundaries.
•
24
•
29.97 drop
•
25
2. Record Enable
Allows record and edit functions to be enabled or disabled.
•
Enabled
•
Disabled
3. T-Bar Range
This sets the speed range of the T-Bar from bottom to top.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
Normal
•
± 5%
•
± 10%
•
Bidirectional
4. T-Bar Mode
Defines how the T-Bar operates.
•
Passive
Movement of an Enabled T-Bar sets the speed, which will be sent upon
either pressing the Play button or calling up a Clip or Cue. Actual
command sent would be selected by the "T-Bar Message" below unless
set at exactly Play speed, in which case a Play message will be sent.
•
Active
Movement of the T-Bar immediately sends an appropriate command to
machine when Enable LED is on.
5. T-Bar Speed Min
This sets the minimum speed to be sent by the T-Bar in Normal Mode when the
T1 (Scaling) button is active.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
Still
•
1/64x
•
1/32x
•
3/64x
SloMoPro RS422 User Manual
•
30 drop
•
29.97
Scaling Disabled: Still to 10x
Scaling Enabled: T-Bar Speed Min and Max.
95% to 105% of play speed
90% to 110% of play speed
-1x to +1x play speed
•
1/16x
•
3/32x
•
1/8x
•
3/16x
17
•
60
•
30
•
1/4x
•
3/8x
•
1/2x
•
3/4x
Advertisement
Table of Contents
