Editable Parameters Of Faders And Touch - JLCooper Electronics MCS-3800 User's Reference Manual

Editable Parameters for the Faders and Touch Sensors
Name
Press the Cancel/Clear key in the Keypad to clear the name.
Use the Cursor buttons to the left of the LCD to move the
cursor. Turn the first encoder to dial in the letters and numbers.
The top row of the LCD show the control's real (permanent)
name. The bottom row of the LCD is the user editable name.
Command
Faders and Touch Sensors send either Controllers or Notes.
Any control can be turned off.
Number
Selects the Controller or Note number.
Channel
Selects MIDI Channel 1 through 16.
Minimum
Minimum controller or note velocity value.
The value sent when the fader is in its lowest position.
Maximum
Maximum controller or note velocity value.
The value sent when the fader is in its highest position.
34