Table of Contents
Advertisement
2.
The facsimile machine starts to send the document.
The TX/RX LED comes on.
If the correspondent does not answer or the line is
busy, the facsimile machine, after a few seconds,
automatically retries transmission (automatic redial
feature). The message "*REDIAL*" appears on the
top line of the display.
If the document is removed from the ADF, the
facsimile machine will automatically interrupt
transmission.
If transmission still proves unsuccessful, after the last
retry you can try to retransmit by pressing PAUSE/
REDIAL, provided the correspondent's number was
dialled on the numeric keypad.
If the "LAST TX REPORT" was enabled in the operating
configuration, the facsimile machine will print the
report at the end of transmission.
If you hear a beep and the error LED comes on, this
means that an error has occurred (e.g. an interruption
in the connection). If this is the case, simultaneously
press LINE STATUS and STOP (to switch off the led)
and repeat the transmission procedure.
DELAYED TRANSMISSION
The facsimile machine can automatically transmit at a preset time. This overcomes problems created by time
zones when the correspondent is based, for example, on a different continent, and enables you to transmit at
cheaper times and when the lines are less busy. To send a document in this way, the document must be left
(having prepared it and set the time at which it is to be sent) in the automatic document feeder (ADF), until the
time set for transmission. Note that, even after setting the facsimile machine for delayed transmission, you can
receive, copy or send documents; just remember to replace the document in the ADF when you've finished.
This section explains how to set delayed transmission. To change the time at which the document is to be sent or cancel
a delayed transmission operation altogether, see the "Connection activities" section of the "MEMORY" chapter.
The facsimile machine is on. The document has been inserted and prepared for transmission (see the
"BEFORE TRANSMISSION/COPYING" chapter). Position the mask (right-hand section of the console)
to display the function keys.
TRANSMISSION
63
Advertisement
Table of Contents
