Last Transmission Report - Olivetti OFX 3100 Instructions Manual

REPORTS
When the functions are accessed from the stand-by status, the display will show the following data:
. With the document inserted in the ADF:
. Without the document:
Current date and time
Operating statuses:
AUTOMATIC RX
MANUAL RX
FAX./TELEPHONE
In either case, if there is a procedure in progress, the corresponding message blinks on the first line of the
display.
Note: Any of the procedures described in this chapter can be interrupted at any time by pressing the STOP
key once or twice, depending on the procedure.

LAST TRANSMISSION REPORT

This report provides information on the last transmission operation performed. It is printed automatically if the
"LAST TX REPORT" parameter was enabled in the operating configuration (refer to the "Setting the operating
configuration parameters" section of the "PROGRAMMING" chapter).
If the "LAST ERROR REPORT" parameter was enabled in the operating configuration, the facsimile machine
will only print the report if transmission is unsuccessful.
106
D O C U M E N T I N S E R T E D
G G/ M M 'A A H H : M M
X X X X X X X X X
Percentage of free
memory
F R E E M E M .
n n n%