Table of Contents
Advertisement
PROGRAMMING
PARAMETER
AUT. DOC. DEL. POLL.
MEM. TX
SUBSTITUTE RECEPTION
PAPER FORMAT
PRINT OVERFLOW
AUTOMATIC STORING
AUTO PAGE RETRANSMISSION
TX SPEED -4800 BPS
TX SPEED - 4800 BPS
FINE RESOL. FOR IMAGE
FINE RESOL. AFTER TX/COPY
AUTO IMAGE AFTER TX / COPY
52
OPERATING
CONDITION
YES: Deletion enabled
NO: Deletion disabled.
YES: Storage enabled.
NO: Storage disabled.
A4
LETTER
LEGAL
YES: Print overflow
NO: Exclude overflow
YES: Storage enabled.
NO: Storage disabled.
YES: Retransmission enabled.
NO: Retransmission disabled.
YES: Function enabled.
NO: Function disabled.
YES: Function enabled.
NO: Function disabled.
YES: Function enabled.
NO: Function disabled.
YES: Function enabled.
NO: Function disabled.
MEANING
Enables/disables deletion of a
previously stored document, after a
polling transmission operation.
Enables/disables storage of incoming
documents in memory when there is
no paper or ink left.
Sets one of the three paper formats.
The instructions for regulating the
paper tray are provided in the
CONSUMABLES chapter.
Enables the data that does not fit on
the A4, LETTER or LEGAL format on
another sheet of paper.
Enables/disables automatic storage
of a document when sending to a
single correspondent.
Enables/disables
retransmission starting from the page
on which transmission
interrupted. This function can only be
enabled if the document has been
stored in memory.
Sets the transmission speed to 4800
BPS.
Automatically selects the FINE
resolution during image adjustment.
Restores the FINE resolution after a
transmission or copying operation.
Restores the AUTO image value after
a transmission or copying operation.
automatic
was
Advertisement
Table of Contents
