Table of Contents
Advertisement
PRINTING PROGRAMMED DATA
You can print out the data programmed under the 24 one-touch dialling keys, 3 program keys and 60 speed
dialling codes. In this way, you can keep track of all the numbers stored (fax and telephone) and the data entered
for each key or code (correspondent's name, transmission speed, graphic definition of the document to be sent,
etc.), the keys or codes that have been programmed and those that have not.
The one-touch dialling key and speed dialling code data is printed:
-
in ascending numeric order, if a name has not been associated with the facsimile machine.
-
in alphabetical order, if the corresponding key has been associated with the correspondent's name as well
as the facsimile number.
If any of the parameters have not been programmed, this is indicated by "—" on the display. If the key or code
has not been programmed at all, it will not be printed.
This section explains how to print out the data and provides a practical example.
o
The facsimile machine is on. The program keys, one-touch dialling keys and speed dialling codes have
all been programmed. Position the mask (right-hand side of the console) to display the function keys.
1.
Follow the procedure described in step 1 of the
"PROGRAMMING ONE-TOUCH DIALLING KEYS"
section or the procedure described in steps 1 and 2
of the "PROGRAMMING SPEED DIALLING CODES
- NORMAL AND EXTENDED" or "PROGRAM KEYS"
sections.
Example: follow the procedure described in steps 1
and 2 of the "PROGRAMMING SPEED DIALLING
CODES" section.
2.
Press PRINT. All the data programmed for coded
speed dialling is printed.
3.
Press STOP to quit the menu .
Printing may be interrupted by pressing the STOP
key .
PROGRAMMING
S T O R I N G F A X / T E L N U M B E R
C O D E D S P E E D D I A L L I N G
35
Advertisement
Table of Contents
