Programming One-Touch Dialling Keys - Olivetti OFX 3100 Instructions Manual

Table of Contents

Advertisement

PROGRAMMING ONE-TOUCH DIALLING KEYS

The facsimile offers several methods of dialling prerecorded facsimile and telephone numbers.
The easiest and fastest method of dialling a number is by pressing one key. There are 24 of these one-touch
keys (01-24) and they are grouped together on the right-hand side of the console. Each key may be
programmed with the following data:
- Facsimile number
- Telephone number
- Name of correspondent
- Transmission speed (normal speed 9600 bps - half-speed 4800 bps, useful on a disturbed line). The
transmission speed selected here takes priority over the operating configuration setting.
- Closed network. This parameter enables you to create a communication network with limited access. Access
is limited by checking the last 4 or 6 digits in the receiver's or sender's facsimile number. This parameter can
only be set here if it has been enabled in the operating configuration.
This section explains how to program one-touch dialling keys. How to use these keys to dial a number is
explained in the "TRANSMISSION" chapter.
o
The facsimile is on. Position the mask (right-hand section of the console) to display the function keys.
1.
Press TEL. REG.
2.
Press START to enable one-touch dialling.
Using the ∨ ∨ ∨ ∨ ∨ or ∧ ∧ ∧ ∧ ∧ key, select the one-touch dialling
3.
key (01-24) that you want to program, e.g. 06.
Otherwise type the one-touch dialling key number
directly on the numeric keypad, or lower the mask
and press the corresponding one-touch dialling key.
If the key has already been programmed, the display
shows the fax number of the associated user.
If this is the case, select a different key (using ∨ ∨ ∨ ∨ ∨ o
∧ ∧ ∧ ∧ ∧ ) , or see the " Clearing programmed data" section.
4.
Press START to start entering the data to be associ-
ated with the selected one-touch dialling key.
If you want to skip a parameter, simply press the
START key. Each time the key is pressed, the next
parameter will be displayed.
PROGRAMMING
S T O R I N G F A X / T E L N U M B E R
O N E - T O U C H D I A L L I N G
1 - T O U C H D I A L L I N G N O . L I S T
0 1 :
1 - T O U C H D I A L L I N G N O . L I S T
0 6 :
S T . 1 - T O U C H N O .
0 6 :
F A X
25

Advertisement

Table of Contents
loading

Table of Contents