Table of Contents
Advertisement
PROGRAMMING
3.
Press START to start setting the password ( max. 4
alphanumeric characters).
Each character is entered by pressing the ∨ or ∧ key
to scroll through the entire set of alphanumeric
characters until the desired character is displayed and
then by pressing the CONFIRM key to confirm selection.
(For a complete list of the alphanumeric characters
available, refer to the "CHARACTER SET TABLE"
chapter).
To delete an entire setting, press CLEAR.
If you want to delete one of the characters set, move
to the character to be changed (using the < or > key)
and overwrite it with the correct one.
4.
To confirm the password set, press START.
The display shows the next function on the menu.
Having set the private mailbox password, the facsimile
machine is automatically set for programming the next
function ("Storing the TX inhibition password").
Repeat the procedure from step 3, if you want to set
the two other passwords, or:
press START four times, if you want to program the
next to last function on the menu (see the "STORING
MESSAGES" section), or:
press STOP to quit the menu.
40
T Y P E N E W P A S S W O R D : A
T Y P E N E W P A S S W O R D : g
P o n g
S T O R I N G D A T A
S T O R I N G T X I N H I B . P A S S W R D
Advertisement
Table of Contents
