Table of Contents
Advertisement
Installation
3.7 Connections
The picture below shows a machine with the feed direction from right to left. The
length of the infeed and outfeed and the number of washing and drying zones
vary depending on the size of the machine. The machine can also operate in the
opposite direction. For the exact location of the various connections, see the spe-
cific diagrams for each machine which are supplied by the manufacturer.
1.
2.
3.
4.
5.
6.
7.
8.
Check that the overheating protection on booster heaters and tank elements is
set to zero.
WD-B 500 - WD-B 900
2
1
1
3
4
7
5
6
1
8
4
2
5
Extractor 400x100 mm without damper
Electrical connection from ceiling
Alternative electrical connection from floor
Hot water connection 55-70° C, (Connection from floor or ceiling)
Cold water connection 5-12° C, (Connection from floor or ceiling)
Condensation water connection (Steam-heated machines)
Steam connection (Steam-heated machines. Connection from floor or ceil-
ing).
Steam pressure 50-140 kPa (Fully steam-heated machine).
Steam pressure 150-250 kPa (Electrically heated drying zone).
Floor drain 400x600 mm
15
Rev. 4.0 (201208)
WDB_08
8
Advertisement
Table of Contents
