Table of Contents
Advertisement
Installation instructions
3.6 Connections
The picture shows a machine with the feed direction from left to right. The
machine can also operate in the opposite feed direction. For the exact location of
the various connection points, see the machine drawing located in the electrical
cabinet. The drawing can also be obtained from the manufacturer.
1
3
1
3
1.
Extraction with damper.
2.
Electrical connection from ceiling.
3.
Floor drain
4.
Steam connection (steam-heated machines)
5.
Condensation water connection (steam-heated machines)
6.
Cold water connection.
7.
Hot water connection.
8.
Alternative electrical connection from floor.
In the following chapter, figures are given in brackets to clarify what needs to be
done. These numbers refer to image and list above.
WD-40BRE
4
6
5
7
5
4
6
7
14
Rev. (202303)
2
8
2
40BRE_03_R1
Advertisement
Table of Contents
