Table of Contents
Advertisement
Installation instructions
3.5 Connections
•
A= Steam hood with extractor (option)
•
B= Condensation unit with heat recovery through the heat recovery unit
(option)
1.
Electrical connection
2.
Water connection
3.
Drain/waste pipe connection
4.
Plugged hole for detergent hose
5.
Bleed for lifting cylinder (on machines with an automatic hood) (optional)
6.
Water pressure outlet for detergent dosage
7.
Alternative water connection from below
In the following chapter, figures are given in brackets to clarify what needs to be
done. These numbers refer to image and list above.
WD-8
A
12
Rev. 4.0 (202202)
B
Min. 20
8_K_I
Advertisement
Table of Contents
