Opening The Storedge Connection Unit Covers - SolarEdge StorEdge SE5000-xxS0 series Installation Manual

Opening the StorEdge Connection Unit Covers

1. Release the six screws attaching the StorEdge Connection Unit external cover to the enclosure and lift
the cover.
2. Open the four internal screws securing the transparent cover to the StorEdge Connection Unit
enclosure and remove the cover.
The following figure shows the connections in the StorEdge Connection Unit:
SolarEdge-StorEdge -Single Battery/High Capacity Installation MAN-01-00283-1.1
Figure 11: The StorEdge Connection Unit connections
Figure 12: The StorEdge Connection Unit connectors
Chapter 5: StorEdge Inverter Connections
25