SolarEdge StorEdge SE5000-xxS0 series Installation Manual page 95

General Inverter Error Codes
Error # Single Phase Error # Three Phase
CPU v3.18 CPU v3.19 CPU v3.18
and below and above and below
N/A 116
N/A 123
N/A 124
N/A 87
144 2x90 89
145 2x91 102
146 2x92 103
147, 150,
147, 150, 3x11, 2x96,
151
151 2x97
152 2x98 152
94
LCD
Message
CPU v3.19
and above
Voltage
Common Voltage
8x53
Too High
8x5A Measurement Error
Ground Current –
8x5B
RCD
8x36 Islanding - Active
8x38 Islanding - Passive
8x45 UDC Max
8x46 UDC Min
3x11, 2x96,
Arc Fault Detected
2x97
Arc detector self-
test failed
SolarEdge-StorEdge -Single Battery/High Capacity Installation MAN-01-00283-1.0
Cause and Troubleshooting
Contact SolarEdge support.
Contact SolarEdge support.
Contact SolarEdge support.
AC grid voltage malfunction. When AC voltage returns the inverter should restart after
the reconnection time.
If the problem persists, consult with the grid operator.
AC grid voltage malfunction. When AC voltage returns the inverter should restart after
the reconnection time.
If the problem persists, consult with the grid operator.
Contact SolarEdge support.
Contact SolarEdge support.
Refer to http://www.solaredge.com/sites/default/files/arc_fault_
detection_application_note.pdf
Refer to http://www.solaredge.com/sites/default/files/arc_fault_detection_application_
note.pdf