Chapter 2: Installing The Power Optimizers; Safety - SolarEdge StorEdge SE5000-xxS0 series Installation Manual

Chapter 2: Installing the Power Optimizers

Safety

The following notes and warnings apply when installing the SolarEdge power optimizers. Some of the
following may not be applicable to smart modules:
WARNING!
When modifying an existing installation, turn OFF the inverter ON/OFF switch and the AC circuit
breaker on the main AC distribution panel.
WARNING!
Input and output connectors are not watertight until mated. Open connectors should be mated to each
other or plugged with appropriate watertight caps.
CAUTION!
Power optimizers are IP65/NEMA4 rated. Choose a mounting location where optimizers will not be
submerged in water.
CAUTION!
This unit must be operated according to the operating specifications provided with the unit.
CAUTION!
Cutting the power optimizer input or output cable connector is prohibited and will void the warranty.
CAUTION!
All PV modules must be connected to a power optimizer.
SolarEdge-StorEdge -Single Battery/High Capacity Installation MAN-01-00283-1.1
Chapter 2: Installing the Power Optimizers
11