SolarEdge StorEdge SE5000-xxS0 series Installation Manual page 8

For single battery or high capacity
Table of Contents

Advertisement

NOTE
The following warning symbols appear on the inverter warning label:
WARNING!
Shutting off the AC breaker does not disable the DC voltage inside the inverter. To obtain safe DC
voltage, turn off the inverter ON/OFF switch and the StorEdge Connection Unit ON/OFF switch.
WARNING!
Before operating the system, ensure that the inverter has been grounded properly.
WARNING!
When handling the battery, adhere to all manufacturer safety instructions.
CAUTION!
This unit must be operated under the specified operating conditions as described in the technical
specifications supplied with the unit.
NOTE
The battery used must be NRTL certified.
NOTE
For battery decommissioning and disposal, follow the manufacturer requirements and instructions.
SolarEdge-StorEdge -Single Battery/High Capacity Installation MAN-01-00283-1.1
Risk of electric shock
Risk of electric shock from energy stored in the capacitor. Do not remove cover until 5
minutes after disconnecting all sources of supply.
Hot surface – To reduce the risk of burns, do not touch.
IMPORTANT INVERTER SAFETY INSTRUCTIONS
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storedge se6000-xxs0 series

Table of Contents