Fit The Side Plates - ABB IRBT 4003S Product Manual

2.3.9 Fit the side plates

Follow the instructions below to fit the side plates.
1. Fit the angle brackets on the ground
2. Fit the side covers by pushing them
3. Apply tape over all joints in the side
4. Continue with
3HEA 800 970-001 Rev. D, Mars 2006
Action
plates.
down between the beam and angle
bracket. Tighten the retaining screws in
the angle brackets.
guard.
"Fitting the cable tray" on
page 2 - 25
Mechanical installation
Info/Illustration
1
2
3
Fit the side plates
2-23