Table of Contents
Advertisement
￭
Example 1: Location of accelerometers on drive end side of motor
1
DE Axial
2
DE Vertical
3
DE Horizontal
4
NDE Horizontal
1
On the drive end (DE) of the motor, pointing in the direction of
the shaft.
On top of the bearing housing, pointing directly towards the
bearing. This sensor should be mounted at an angle of 90 degrees
to the DE Horizontal sensor.
On the DE of the motor, pointing directly towards the bearing.
On the Non-Drive End (NDE) of the motor, pointing directly to-
wards the bearing.
Installing the accelerometers 37
2
4
3
Advertisement
Table of Contents
