Activating The Automatic Lubrication System; Activating Grease Injectors - ABB IRBT 4003S Product Manual

4.3 Activating the automatic lubrication system

If the track motion is equipped with an automatic lubrication system, it must be
activated. These may be of different types – automatic lubrication systems with
grease injectors or central lubrication systems with timers. These are activated in
different ways.

4.3.1 Activating grease injectors

The grease injectors in the automatic lubrication system are not activated on
delivery. When the grease injectors are activated, they will continuously and
automatically apply the correct amount of grease for three months.
Activate the grease injectors as follows:
1. Locate the grease injectors (5 units).
2. Press the activation pin fully on each
3. Listen for the injector's grease motor to
3HEA 800 970-001 Rev. D, Mars 2006
Action
grease injector.
start (it takes about 10 seconds after the
pin has been pressed in).
Commissioning
Activating the automatic lubrication system
Info/Illustration
2
1
1
1
2-41