Agilent Technologies 1290 Infinity LC System System Manual And Quick Reference page 76

4
System Setup and Installation
Installing the Module
Two Stack Configuration
In case the autosampler thermostat is added to the system, a two-stack
configuration is recommended, which places both heavy modules (1290
Infinity pump and thermostat) at the bottom of each stack and avoids high
stacks. Some users prefer the lower height of this arrangement even without
the autosampler thermostat. A slightly longer capillary is required between
the pump and autosampler. (See
page 77).
Figure 27
76
Recommended two stack configuration for 1290 Infinity with binary pump
(front view)
Agilent 1290 Infinity LC System Manual and Quick Reference
Figure 27 on page 76 and Figure 28 on