Agilent Technologies 1290 Infinity LC System System Manual And Quick Reference page 141

6
Appendix
Setting Up a Method using Edit Entire Method
The access points in the work flow of the method are:
• Pre-Run Command / Macro
• Customized Data Analysis Macro
• Post-Run Command / Macro
Save Method with Data saves a copy of the method in the data file and names it
RUN.M. This is not needed if the ChemStation is operated in the usual
configuration as the software always saves the method in the data file (all
versions since B.02.01). Only if the ChemStation has been configured such that
Unique Sequence Folder Creation is turned off and hence methods are not
routinely copied into the data file, this option will be relevant.
As this is the final screen in the process, clicking OK will exit from Run Time
Checklist and from the Edit Entire Method process. The method should now be
saved into the master methods directory, by default C:\Chem32\1\Methods,
using File > Save As > Method or Method Menu > Save Method As.
Agilent 1290 Infinity LC System Manual and Quick Reference 141