Agilent Technologies 1290 Infinity LC System System Manual And Quick Reference page 81

Two Stack Configuration
In case the autosampler thermostat is added to the system, a two-stack
configuration is recommended, which places both heavy modules (1290
Infinity pump and thermostat) at the bottom of each stack and avoids high
stacks. Some users prefer the lower height of this arrangement even without
the autosampler thermostat. A slightly longer capillary is required between
the pump and autosampler. (See
page 82).
Instant Pilot
Detector
Column compartment
Solvent cabinet
Pump
Autosampler
Thermostat for the
ALS (optional)
Figure 31
Agilent 1290 Infinity LC System Manual and Quick Reference
Recommended two stack configuration for 1290 Infinity with quaternary pump
(front view)
System Setup and Installation
Figure 31 on page 81 and
Installing the Module
Figure 32 on
4
81