Rear Master Cylinder Removal And Disassembly - Suzuki RM-Z450 Owner's Service Manual

REAR MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain brake fluid. (%16-4)
• Remove the cotter pin, washer and then master cylinder rod
pin 1.
• Remove the master cylinder mounting bolts and master cylin-
der 2.
• Place a rag under the brake hose union bolt 3 to catch spilled
brake fluid.
• Remove the union bolt 3.
• Disconnect the brake hose.
• Remove the master cylinder.
• Remove the dust boot 4.
• Remove the snap ring 5 with snap ring pliers.
( 09900-06108: Snap ring pliers
• Remove the push rod 6.
• Remove the piston/cup set 7.
FRONT AND REAR BRAKES 16-15