Auto Setting - Tenma 72-7615 Manual

• Stop settings menu.
Functions
Stop type
Condition
Threshold
Return
• Template settings menu.
Functions
Reference
waveform
Horizontal
tolerance
Vertical tolerance
Create template
Return
Time Setup
• Use multi-function control to make adjustment and confirm by pressing the control
after pressing required function button to select the option.
Functions
Display Time
Minute and hour
Date and Month
Year
Confirm

AUTO SETTING

Auto Setup
• Auto setup simplifies the operation. Press AUTO and the oscilloscope can
automatically adjust the vertical deflection factor and horizontal time base range
according to the amplitude and frequency of the waveform, and also ensure a
stable display of the waveform.
• When the oscilloscope is in auto mode the setup is as follows:
Options
The test function stops after it reaches a specified pass
Pass count
count number
The test function stops after it reaches a specified fail count
Fail count
number
>=,<=
Stop condition setting
Use the multi-purpose control to select the stop condition
1~10000
threshold
Return to previous menu
-----
Options
Select a channel CH1~CH4 with horizontal and vertical
CH1 to CH4
tolerance as template
Use the multi-purpose control to select the horizontal
1~100
tolerance
1~10000 Use the multi-purpose control to select the vertical tolerance
------ Create template with above conditions
Return to previous menu
Options
Open time display and select if the time shall display if the
On or OFF
frequency meter is on
----- Press F2 to select then use multi-function control to adjust
----- Press F3 to select then use multi-function control to adjust
------ Press F4 to select then use multi-function control to adjust
Set and return to Auxiliary menu
Description
Description
Description
26