Factory Settings; Chip Card; Remote Control - Kettler SG2R Training And Operating Instructions

Training and operating instructions
Settings -> 4. Standby
I
n this menu, you may set the period of time the display takes
to switch off after the work out when no more keys will be
pressed.
Press "Back" to save the settings.
Settings -> 5. Factory Settings
In this menu, the original programmes of the different groups
of programmes can be restored. Any programme changes will
be deleted.
Press "Delete" to get to the function "Delete OK".
Press " Delete OK" to delete the entries and changes of the
menu options highlighted in black. For programmes, the origi-
nal settings will only be restored for active user. Press All
Settings to delete all settings of all users.
Press "Back" to jump to the menu "Settings".
14
GB
Settings -> 6. Chip Card
Here the chip card will be formatted. By the formatting, a user
"Person K" will be set up in addition to Person 1-4. The per-
son-related data may be entered in the "Person Data" menu.
They will be saved on the card.
Determine here how often training data are to be saved on
the card. Choose an interval between 1-60 seconds. When
entering the interval time, the recording duration will be chan-
ged.
Press "Format." to select the function "Format.OK".
Press "Format. OK" to format the chip card. All data will be
deleted. A percentage indication shows the progress of the
formatting.
Press "Back" to skip to the "Settings" menu.
Note:
When formatting, the percentage indication will not be coun-
ted up continuously. Great leaps are normal.
Some menus will be displayed and executed with a time
delay when the chip card has been inserted. When the chip
card has been inserted, no change of persons is possible.
.
When the chip card has been inserted, each training will be
recorded.
• Use original KETTLER chip cards only.
• Insert the card into the slot applying light pressure.
• If the card cannot be read, turn the card over.
Future applications "ErgoCard"
In connection with a chip-card reader, the programme
"ErgoCard" offers the option of displaying training data and
creating individual programmes. In connection with our trai-
ning software ERGO KONZEPT II it is possible to import and
edit training data. This programme will be offered free of
charge on our homepage www.kettler.de shortly
Settings -> 7. Remote Control
If the radio remote control loses contact to the receiver, restore
connection again in this menu point.
Press "Teach" and you will be requested to press all 4 remote
control keys simultaneously.
Subsequently, the indication "Remote Control found" should
appear. The connection has been restored.