Igmp Host-Join Vlan - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Parameter
group-address: Multicast address of the multicast group that an interface will join.
port: Specifies the port in the VLAN interface.
interface-list: Forward port list. You can specify multiple ports by providing this
argument in the form of interface-list = { interface-type interface-number [ to
{ interface-type interface-number } ] }&<1-10> where the interface-type argument refers
to the port type and the interface-number argument refers to the port number. For the
meanings and value ranges of the interface-type argument and the interface-number
argument, refer to the parameter descriptions in the "Port Basic Configuration" module
in this manual.
Description
Use the igmp host-join port command to enable a port in the VLAN interface of a
switch to join a multicast group.
Use undo igmp host-join port command to remove the configuration.
By default, a VLAN interface of a switch does not belong to any multicast group.
Related command: igmp group-policy.
Example
# Add Ethernet1/0/1 in VLAN-interface10 to the multicast group at 225.0.0.1.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Vlan-interface 10
[H3C-Vlan-interface10] igmp host-join 225.0.0.1 port Ethernet 1/0/1

5.1.8 igmp host-join vlan

Syntax
igmp host-join group-address vlan vlan-id
undo igmp host-join group-address vlan vlan-id
View
Port view
Parameter
group-address: Multicast address of the multicast group that an interface will join.
vlan-id: ID of the VLAN to which the port belongs.
Chapter 5 IGMP Configuration Commands
5-8