H3C S3600 Series Command Manual page 22

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Parameter
group-address: Multicast group address used to specify a multicast group, in the range
of 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Specifies the incoming interface of multicast forwarding entries.
register: Specifies the registration VLAN interface of PIM-SM.
Description
Use the display multicast forwarding-table command to display the information
about multicast forwarding tables.
Related command: display multicast routing-table.
Example
# Display the information about the multicast forwarding table.
<H3C> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 1 entry: 0 entry created by IP, 1 entry created by protocol
00001. (10.0.0.4, 225.1.1.1), iif Vlan-interface2, 0 oifs,
Protocol Create
Matched 122 pkts(183000 bytes), Wrong If 0 pkts
Forwarded 122 pkts(183000 bytes)
Total 1 entry Listed
The following table describes the fields in the displayed information above:
Table 2-3 Description on the fields of the display multicast forwarding-table
command
Multicast Forwarding Cache Table
Total 1 entries
00001
(10.0.0.4, 225.1.1.1)
iif Vlan-interface2, 0 oifs
Field
2-4
Chapter 2 Common IP Multicast Configuration
Description
Multicast forwarding table
Total number of entries
Serial number of an entry
(s,g)
The incoming interface of the multicast
forwarding table is vlan-interface2, and the
multicast forwarding table does not have an
outgoing interface.
Commands