Peer Connect-Interface - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
sa-limit: Maximum number of SA messages cached, ranging from 1 to 2,048.
Description
Use the peer sa-cache-maximum command to set the maximum number of SA
messages cached on the router.
Use the undo peer sa-cache-maximum command to restore the default configuration.
By default, the maximum number of SA messages cached on a router is 2,048.
You are recommended to perform this configuration on all MSDP peers on a network
that is vulnerable to DoS attacks.
Related command: display msdp sa-count, display msdp peer-status, display
msdp brief.
Example
# Configure the SA cache of the router so that it caches a maximum of 100 SA
messages received from the MSDP peer 125.10.7.6.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] msdp
[H3C-msdp] peer 125.10.7.6 sa-cache-maximum 100

7.1.16 peer connect-interface

Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
View
MSDP view
Parameter
peer-address: IP address of the MSDP peer.
interface-type interface-number: Interface type and interface number. The local router
uses the primary address of this interface as the source IP to establish a TCP
connection with the remote MSDP peer.
Description
Use the peer connect-interface command to configure an MSDP peer.
Use the undo peer connect-interface command to disable the configured MSDP
peer.
Chapter 7 MSDP Configuration Commands
7-14