Interfaces; Overview Of Interfaces; Table 3-1 Overview Of Available Simotion D410 Interfaces; Table 3-2 Overview Of Non-Usable Simotion D410 Interfaces - Siemens SIMOTION D410 Manual

Interfaces

3.1

Overview of interfaces

This chapter describes the SIMOTION D410 interfaces.
Available interfaces
Table 3-1
Interface
Digital inputs
Digital inputs/outputs
DRIVE-CLiQ interface
PROFIBUS DP interface
(SIMOTION D410 DP only)
PROFINET interface
(SIMOTION D410 PN only)
Power Module Interface
Encoder interface (HTL/TTL)
EP terminals/temperature sensor connection
Power supply connection
Measuring sockets
Non-usable interfaces
Table 3-2
Interface
RS232 serial interface
Interface for BOP20
See also
SIMOTION D410 DP display (Page 17)
SIMOTION D410 PN display (Page 20)
D410
Manual, 03/2007 Edition
Overview of available SIMOTION D410 interfaces
Overview of non-usable SIMOTION D410 interfaces
Designation Connector type
X121 12-pin socket
X121 12-pin socket
X100 DRIVE-CLiQ connector
X21 9-pin SUB-D socket
X200 and X201 8-pin RJ45 socket
PM-IF 8-pin direct connector
X23 15-pin SUB-D socket
X120 Mini Combicon, 8-pin
X124 Combicon 4-pin
T0, T1, T2 and M Sockets
Designation Connector type
X22 9-pin SUB-D socket
X142 8-pin multipoint connector
3
27