Traffic Shaping - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > Internet > Traffic Management > Traffic Shaping
Once a profile has been created it can then be associated with a traffic flow from the LAN to WAN. Traffic selector
configuration binds a bandwidth profile to a type or source of LAN traffic with the following settings.
To create a traffic selector:
1. Click Network > Internet > Traffic Management > Traffic Shaping.
2. Click Add New Traffic Selector.
3. Complete the fields from the table below and click Save.
Field
Available Profiles
Service
Traffic Selector Match Type Select IP or MAC Address.
IP Address
Subnet Mask
MAC Address
Save
D-Link DSR-Series User Manual

Traffic Shaping

Select a bandwidth profile from the drop-down menu.
Select a service from the drop-down menu.
If you selected IP, enter the IP address of the source associated with this profile.
If you selected IP, enter a subnet mask.
If you selected MAC, enter the MAC address of the source associated with this profile.
Click to save and activate your settings.
Description
56