Section 5 - Connect to the Internet
1. Click Network > Internet > WAN Mode.
2. Complete the fields from the table below and click Save.
Field
WAN Mode
Load Balance
WAN Health Check
Save
D-Link DSR-Series User Manual
Round Robin
Select Load Balancing from the drop-down menu.
Select Round Robin.
• DNS lookup using WAN DNS Servers: DNS Lookup of the DNS Servers of the primary link is used to
detect primary WAN connectivity.
• DNS lookup using DNS Servers: DNS Lookup of the custom DNS Servers can be specified to check the
connectivity of the primary link.
• Ping these IP addresses: These IP's will be pinged at regular intervals to check the connectivity of the
primary link.
• Retry Interval is: The number tells the router how often it should run the above configured failure
detection method.
• Failover after: This sets the number of retries after which failover is initiated.
Click to save and activate your settings.
Description
45