Connect To A 3G Internet Service - D-Link DIR-412 User Manual

Section 2 - Installation
If you are using a 3G USB dongle to connect to the Internet, please follow the steps below:
1. Move the toggle switch to the 3G Router mode position and wait for the DIR-412 to reboot.
2. Insert your 3G USB dongle into the DIR-412's 3G USB port.
3. Plug one end of Ethernet cable into the DIR-412, and the other end into your PC.
4. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 50 seconds for the router
to boot.
5. Verify the link lights on the router. The power light, Internet light, and the Wireless LAN light should be lit. If not,
make sure your computer and router are powered on and verify the cable connections are correct.
D-Link DIR-412 User Manual

Connect to a 3G Internet Service

12