Connect To A Wireless Client; Wps Button - D-Link M30 User Manual

Section 6 - Connecting a Wireless Client
The easiest way to connect your wireless devices to your Wi-Fi network is through WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button
that you can press to connect to the router. Please refer to your user manual for the wireless device you want to connect to
make sure you understand how to enable WPS. After consulting your device's manual, follow the steps below:
Step 1 - Press the WPS button on the router for about 1 second. The LED on the top will start to blink white.
Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the LED stops blinking, you will be connected and
your wireless connection will be encrypted with WPA2.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual

Connect to a Wireless Client

WPS Button

WPS Button
125